REMOTE CONTROLLED AUTOMATIC SLIDING GATE OPERATOR (MODEL NO. KF-200 DC)

The sliding gate operators are used to drive sliding Gates for Industrial ,Commercial and residential uses. the operators can be fitted with gear wheel or chain wheel and featured with powerful starting strength, capable of overwork at short time. In case of power failure, an emergency release key allows to operate the gate manually.
 
 

Technical Reference
Power supply 24VDC
Motor speed. 1800rpm
Motor power 120W
Output torque 191Nm
Max. Gate weight 750Kg
Opening speed 12m/min
Reduction ratio 1:30
 
 

Gear-driver or Chain-driver is optional.

Magnetic or Spring limit switch is optional.

The self-locking electromechanical gearmotor

Keeps the gate completely closed.

Motor torque adjustment

Stop on closing if it hits obstruction.

Overheat & Overload dual protection.
 

Emergency release key in case of power failure

Control panel wiring are available to safety device, alarm lamp and remote controller.

Available in 240 DC version, which can be operated by storage battery.